产品描述:IS200ESELH2A GE EX2100系列励磁机选择板
IS200ESELH2A技术规范
| 电路板描述 | 励磁机选择器板 |
| ESEL集团 | 二 |
| 功能 | 帮助发射星门-发射SCR |
| 桥驱动器的数量 | 三 |
| 产品特定手册 | GEI-100456 |
| 重量 | 大约2磅 |
/u003Cp dir=/u0022ltr/u0022/u003EWith this IS200ESELH2A it is the second group of the ESEL boards, as the second group to operate properly it contains three bridge drivers. /u003Cstrong/u003EWhen being used in connection with the EGPA boards and if there are redundant controllers within the power conversion cabinet then two ESEL boards will need to be used, one will be powered by the M1 and the other by M2, the most active ESEL which is selected by controller C will send all of the necessary signals to the attached EGPA boards./u0026nbsp;/u003C/strong/u003E/u003C/p/u003E
/u003Cp dir=/u0022ltr/u0022/u003EMost of the IS200ESELH2A models are now obsolete due to being discontinued by GE, but there is still some market availability, AX Control INC does its best to keep this model on our warehouse shelves for you. For more information, you can contact us at (919) 372-8413./u0026nbsp;/u003C/p/u003E"}">
产品说明
IS200ESELH2A型是GE公司生产的EX2100系列励磁机选择板的一部分。IS200ESELH2A的主要功能是从连接的EMIO板接收逻辑电平脉冲信号，然后将脉冲信号发送到最多六组电缆，这些电缆将分配到励磁机门脉冲放大器(EGPA)板，以帮助SCR的门触发。
对于IS200ESELH2A，这是第二组ESEL板，因为第二组板包含三个桥接驱动器，可以正常工作。当与EGPA板一起使用时，如果电源转换柜内有冗余控制器，则需要使用两个ESEL板，一个由M1供电，另一个由M2供电，由控制器C选择的的ESEL将向连接的EGPA板发送所有必要的信号。
IS200ESELH1A
IS200ESELH2A Technical Specifications
| Board Description | Exciter Selector Board |
| ESEL Group | Two |
| Function | Help Fire Gate-Firing SCRs |
| Number of Bridge Driver(s) | Three |
| Product Specific Manual | GEI-100456 |
| Weight | Approximately 2 pounds |
/u003Cp dir=/u0022ltr/u0022/u003EWith this IS200ESELH2A it is the second group of the ESEL boards, as the second group to operate properly it contains three bridge drivers. /u003Cstrong/u003EWhen being used in connection with the EGPA boards and if there are redundant controllers within the power conversion cabinet then two ESEL boards will need to be used, one will be powered by the M1 and the other by M2, the most active ESEL which is selected by controller C will send all of the necessary signals to the attached EGPA boards./u0026nbsp;/u003C/strong/u003E/u003C/p/u003E
/u003Cp dir=/u0022ltr/u0022/u003EMost of the IS200ESELH2A models are now obsolete due to being discontinued by GE, but there is still some market availability, AX Control INC does its best to keep this model on our warehouse shelves for you. For more information, you can contact us at (919) 372-8413./u0026nbsp;/u003C/p/u003E"}">
Product Description
Model IS200ESELH2A is part of the Exciter Selector Board parts produced by GE as part of the EX2100 series. The primary function of the IS200ESELH2A is to receive logic level pulse signals from the connected EMIO board, which will then send the pulse signals to up to six sets of cables that will distribute to exciter gate pulse amplifier (EGPA) boards to help with the gate-firing of SCRs.
With this IS200ESELH2A it is the second group of the ESEL boards, as the second group to operate properly it contains three bridge drivers. When being used in connection with the EGPA boards and if there are redundant controllers within the power conversion cabinet then two ESEL boards will need to be used, one will be powered by the M1 and the other by M2, the most active ESEL which is selected by controller C will send all of the necessary signals to the attached EGPA boards.
Frequently Asked Questions about IS200ESELH2A
What is the primary difference between ESELH1 and ESELH2?
What other board(s) does the IS200ESELH2A connect to?
There are a number of different board-level types. What level is the IS200ESELH2A model?
Is the ESEL board mounted in section C?
